Appliances

Appliances

Cookware

Cookware

Bed & Bath

Bed & Bath

Load image into Gallery viewer, Mayhew Pro 25077 3/8-Inch Knurled Brass Drift Punch
  • Load image into Gallery viewer, Mayhew Pro 25077 3/8-Inch Knurled Brass Drift Punch
Vendor
Mayhew Tools

Mayhew Pro 25077 3/8-Inch Knurled Brass Drift Punch

4.6
Regular price
₪ 174.00
Sale price
₪ 174.00
Regular price
₪ 290.00
Sold out
Unit price
per 
Save 40% (₪ 116.00)
Error You can't add more than 500 quantity.

  • Tracked Shipping on All Orders
  • 14 Days Returns

Description

  • Used for non-marring applications
  • Designed to inhibit sparking
  • 3/8" body by 6" overall length
  • Made in the USA
  • Over all length: 6-Inch

Shipping and Returns

  • We offer tracked shipping on all orders. Tracking information will be shared as soon as the order is dispatched.
  • Please check the delivery estimate before adding a product to the cart. This is displayed for every product on the website.
  • Available shipping methods and charges will be displayed at the time of checkout, depending on your exact location.
  • All customers are entitled to a return window of 14 days, starting from the date of delivery of the product(s).
  • Customers are advised to read our return policy for details of the return process, eligibility, refunds as well as cancellations or exchanges.
  • In case of any issues or concerns about Shipping or Returns, please contact us and we will be happy to help.

Customer Reviews

Nicely made Little soft, but that's probably not the metal's fault :-) Just need to make sure you're banging it straight on, and not at an angle since the metal will pucker and ding. 5USA Made! I went out of my way to get a USA made drift. This is perfect. It feels great int he hand and does its job perfectly. 5Nice heft, but not too big for gun site removal or application. Nice heft, but not too big for gun site removal or application. M&P Shield and M&P 40 (4.25 in barrel). No marring as far as gun slides are concerned. Any marks can be wiped away and do not scratch. 5Great tool and great service The item is as expected. I've purchased Mayhew tools for a while and the quality is excellent and a great value. When I purchased this brass drift, the package was delivered on time, however did not include the tool. Empty package. Amazon customer support was the shining star and replaced my order in a couple of days. No probing questions or insinuations (that perhaps I'm just looking for a free drift) just replaced it with no hassles and a very pleasant demeanor. Great job and thanks! 5No race stands in this punch s way! Bought this to remove races in 4 hubs off of my trailer. Work like a charm without fear of wrecking the hub. Subsequently ended replacing all of the bearings on my father s trailer as well... where again, I was super happy with this punch 5Good tool to have. The Brass used is the right stuff Used to punch bearing races for reuse in a Dana 44 front section. No damage to the bearing race at all. It takes a lot of small taps around the race to get out, but the technique works and saves damage to important parts. The drift is soft enough to conform to the work piece and hard enough to not shear off and loose the contact pattern. This is a consumable type of tool so just use it, clean it up with a fill after use and then buy another when it gets too short to use 5A nicely machined hunk of brass and a lifesaver A nicely machined hunk of brass and a lifesaver. When I need to apply precise force to a part I'm worried about messing up, this has done the trick. I first used it to tap a big bearing back square as I slowly worked a tight-fitting case off a differential. It's the right tool for certain jobs, and this was one of them. I'm sure it won't be the last. 4USA BRASS! I needed a brass punch for knocking out the bearing races in my trailer hubs. This works perfect for that. The brass is non-marring, and works real well on the tempered steel races. The knurling is first rate and even a little grease on it won't effect the grip. Do be aware that brass being much softer will deform (it is called consumable) and that it is possible to chip or split this tool if your not careful (lots of light taps will work better than on big smash!) Also choose you hammer carefully as a steel hammer will mushroom the ends very quickly ( I use a rubber mallet with this with excellent results). THis is well worth the price as it is US made! 5Works Used to install a Trijicon night sight on a Glock. It worked and while it didn't damage the sight, it wore off the white writing. Not a big deal but be careful if you do it too. If I wasn't so cheap I'd get a proper sight pusher but, this works until then 4Great for removing bearing races. I used this to remove some bearing races. What will happen is this will deform/get destroyed instead of your wheel hub. When I used a steel drift and finished removing the races I had nicks on my wheel hub. So, use this for any project you don't want to nick/deform metal since brass is a softer metal than steel. Yes, this will deform/dent during your race removal--nothing you can do, shows it is working properly. I suppose you can always cut or sand to clean it up. I removed about 8 races with this and you can probably do 20 or so before you'd have to toss this. I did have a lot of small gold metal flakes after I had to clean/remove from my wheelhub before reassembling. 4
Mayhew Pro 25077 3/8-Inch Knurled Brass Drift Punch

Mayhew Pro 25077 3/8-Inch Knurled Brass Drift Punch

4.6
Error You can't add more than 500 quantity.
Regular price
₪ 174.00
Sale price
₪ 174.00
Regular price
₪ 290.00
Sold out
Unit price
per 
Save 40% (₪ 116.00)